
Model 2012LE


- Easy Maintenance
- Spray Wand for Additional Cleaning
- Excellent Solvent Containment & NESHAP Compliant
- Reduced Solvent & Operating Costs
- Small Foot-Print
- On Casters for mobility
- Compatible with Variety of Solvents
- 120% Freeboard
- **For a Model with the Same Great Performance but Fits Through a Standard Door, see the Ultra™ 2012LE-Narrow

Ultrasonic Vapor Degreasing System
Model 2012LE
DIMENSIONS | |
Ultrasonic Cleaning Tank | 20”L x 12”W x 12” Deep |
Vapor Cleaning Zone | 40”L x 12”W x 12” Deep |
Boil Tank | 20”L x 12”W |
Footprint Dimensions (without casters)** | 59”L x 55”W x 55” High** |
FEATURES | |
Ultrasonic Cleaning | 500 Watts of Power at 40 kHz Field replaceable components. Adjustable Power and Sweep. |
Vapor Cleaning | Vapor Cleaning Zone above Boil Tank and Ultrasonic Tank |
Spray Cleaning | Hand Spray Wand and Large Spray Reserve Tank |
Filtration of Ultrasonic Tank | Continuous Filtration |
Boil Tank Access Door | “Easy Ring” Door System |
Ultrasonic Tank Access Door | “Easy Ring” Door System |
SOLVENT CONTAINMENT | |
NESHAP Compliant Features | Yes |
Primary Condensing Coil | Refrigerated Stainless Steel |
Low-Temp Freeboard Condensation Coil | Refrigerated Finned Stainless Steel operating at -10F to -20F |
Freeboard Ratio | 120% |
Horizontal Slide Lid | Manual or Automated |
Watlow Solvent Safety and Temperature Controls | HTC, LTC, SVC, VU, RT and Low-Level Float |
Monitoring of the Vapor Degreaser’s Correct Operating Condition | Comprehensive Indicator Light System and Temperature Displays |
AUTOMATED PART CLEANING | |
BHE Automated Basket Handling System | Yes—Optional |
OPERATING REQUIREMENTS | |
Solvent Operating Requirement | 26 Gallons |
Typical Electrical Service | 208V or 240V / 1 Phase |
ULTRA™ 2012LE Low Emission Features



- NESHAP Compliant - Vapor Degreasing System
- Solid Stainless Steel Construction - Heavy Gauge 304 Stainless Steel used on tank, water separator, spray reserve tank, primary coil, low-temperature coil, lid system, tank access doors and tank fittings.
- Stainless Steel Primary Condensing Coil - New Copeland refrigeration system operating with standard R134A refrigerant.
- Sub-Zero Temperature Condensing Coil - Finned stainless steel condensation coil with Copeland R404A refrigeration operating to approximately -20F thus broadening the height of the solvent flash-off dwell zone for enhanced solvent containment.
- Foot Operated Spray Lance System - Mag-drive pump with distillate spray reservoir with Vapor Up Safety Control which requires presence of vapor to permit operation of spray wand.
- High Volume Condensate Water Separator - feeding spray reservoir
- Digital Display Safety Control Panel - including HTC, LTC, SVC, VU, RT
- Ultrasonic Power – 500 Watts @ 40 kHz - field replaceable submersible transducers and plug in external ultrasonic generator for easy servicing
- Ultrasonic Power - Input adjustment & sweep frequency adjustment
- Ultrasonic Immersion Sump filtration and recirculation system with mag-drive pump
- WATLOW Temperature Safety Limit Controls - Digital display on Control Panel; tem-perature set point as well as actual temperature – SVC (Safety Vapor Control), HTC (High Temperature Control), LTC (Liquid Temperature Control) and RT (Refrigeration Temperature Control)
- Low-Level Float Safety System - Ensures the minimum amount of solvent in boil sump for proper system operation.
- Comprehensive Indicator Light System on Control Panel - Includes solvent low level float fault indicator lights (for easy identification of operating fault conditions). “Spray Ready” indicator light and zero coil “Defrost” indicator light, illuminated on/off switches for easy identification of system condition “Heat”, “Filtration”, Main Power”, “Refrigeration” and “Low-Temp Refrigeration”.
- Horizontal Slide Lid - for solvent containment. Optional power roll-top available.
- Casters - for easy movement.
- Simple In & Out Electric Immersion Heater - “Screw-In” Type Elements for easy replacement.
- Two Sump Access Clean-Out Doors - Boil Sump & Immersion Sump access for ease of maintenance though the clean-out door rather than over the tank top
- One (1) stainless steel workbasket
- Comprehensive 1-Year Manufacturer’s Warranty
- ULTRA™ 2012LE Operator’s Manual
ULTRA™ 2012LE Benefits
- Simple engineering and stoutness of design for durability and ease-of-maintenance
- Excellent training - start-up, shut down, maintenance and good solvent cleaning work practices
- Easy to support in the field with accessible heating elements, clear temperature read-outs, sophisticated indicator light system, and updated refrigeration systems using standard refrigerant
- Cost effective operation and maintenance
- Compact footprint
- Effective with a variety of non-flammable solvents, including chlorinated, brominated & fluorinated
- State-of-the-art engineering based on a best practices for simplicity, field supportability and reliability
- Minimal Solvent Emissions & Reduced Operating Costs due to NESHAP Compliant coils


ULTRA™ 2012LE Options
- Electric horizontal slide lid
- Additional baskets
- Solvent Containment Spill Tray
- Increased Ultrasonic Power
- Choice of vapor degreasing solvent including EnTron, EnTron-Aero, GenTech & AeroTron
- Automated Vertical Basket Handling System